Gast 0523 Series Lubricated Laboratory Vacuum Pumps and Manuel d'utilisateur télécharger pdf (Page 6)

Series 0823 and 1023:

hese models use a constant level oiler. The

lubrication rate is determined by the temperature,

the vacuum or pressure at which the pump is

operating, and the siphon jar oil level

(determined by the vertical position of the tube in

the jar).

The lower end of the tube should be 1/4" from

the bottom of the oil jar for normal lubrication. To

reposition the tube, loosen the locknut and adjust

the sleeve up or down. Lock the new position

with the locknut. For faster lubrication, raise the

reservoir tube away from the bottom of the oil jar.

For slower lubrication, lower the reservoir tube

toward the bottom of the jar.

To replenish the oil, pull the reservoir upward out

of the adjusting sleeve and turn it over. Add oil

through the tube. When the upper reservoir is

filled, replace it through the adjusting sleeve and

firmly seat it against the top of the sleeve.

All Models:

The oil wick should be folded in half, with the two

ends submerged in the oil at the bottom of the

Jar, and the folded center inserted into the

connector approximately 3/8" past the two

breather holes in the connector (but not touching

the feed hole leading to the pump). Both the

breather holes and the feed hole must be

unrestricted.

eries 0323 and 0523:

These models use a siphon oiler. The

lubrication rate is determined by the

temperature, the operating vacuum or

ressure, and the siphon jar oil level. Keep

the siphon jar filled to the line shown on the

jar. Either unscrew the jar or fill through the

spring-loaded cap.

All Models:

The oil wick should be folded in half, with the

two ends submerged in the oil at the bottom

of the Jar, and the folded center inserted into

the connector approximately 3/8" past the two

breather holes in the connector (but not

touching the feed hole leading to the pump).

Both the breather holes and the feed hole

must be unrestricted.

LUBRICATION

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Gast 0523 Series Lubricated Laboratory Vacuum Pumps and Manuel d'utilisateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Pompes Gast 0523 Series Lubricated Laboratory Vacuum Pumps and