Gast ROA Series Laboratory Manuel d'utilisateur télécharger pdf

OPERATION & MAINTENANCE

USER INSTRUCTIONS

Laboratory Rocking Piston

Vacuum Pump and Compressor

70-5200 G480PL (Rev.C)

KEEP THIS DOCUMENT FOR FUTURE REFERENCE

ROA Series

This is the hazard alert symbol: m When you see

this symbol, be aware that personal injury or property

damage is possible. The hazard is explained in the

text following the symbol. Read the information

carefully before proceeding.

The following is an explanation of the three

different types of hazards:

m DANGER Severe personal injury or death

will occur if hazard is ignored.

m WARNING Severe personal injury or death

can occur if hazard is ignored.

m CAUTION Minor injury or property damage

can occur if hazard is ignored.

GENERAL INFORMATION

This pump is designed to be used for the purpose of

pumping air. The pump should not be used for the

pumping of fluids, particles, solids or any combus-

tible substances likely to cause explosions.

m DANGER Do not pump flammable or explosive

gases or operate the unit in an atmo-

sphere containing them.

m CAUTION The pump is designed for pumping air.

Do not allow corrosive gases or

particulate material to enter the pump.

Water, oil-based contaminants, or

other liquids must be filtered out.

m CAUTION Normal ambient temperature should

not exceed 40

C (104

F). For

operation at higher temperatures,

consult the factory.

m WARNING Exhaust air temperature can be-

come very hot. Keep away from air

stream.

Performance is reduced by low atmospheric pressure found

at high altitudes. Consult a Gast distributor for details.

Never lubricate this oil-less pump. Most components are

made of aluminum and the valves are stainless steel.

Pressure Gauge

The pressure gauge shows

the output pressure.

Pressure Regulator

Turn the regulator screw clockwise

to increase pressure (up to approxi-

mately 100 PSI max. with the screw

turned fully to the end stop).

Vacuum Gaug e

The vacuum gauge shows

the inlet vacuum.

Vacuum Regulator

Turn the regulator screw clockwise

to increase vacuum (up to approxi-

mately 25” Hg max. with the screw

turned fully to the end stop).

Note: Maximum pressure and vacuum

cannot be produced at the same time.

1 2 3 4

Résumé du contenu

Page 1 - Vacuum Pump and Compressor

OPERATION & MAINTENANCEUSER INSTRUCTIONSLaboratory Rocking PistonVacuum Pump and Compressor 70-5200 G480PL (Rev.C)KEEP THIS DOCUMEN

Page 2 - OPERATION

INSTALLATIONm WARNING To avoid risk of electrocution do notuse this product in an area where itcould come in contact with water orother liquids. If e

Page 3 - SHUTDOWN PROCEDURES

mWARNING The head surface(s) can be very hotdepending on pump duty and speed.Do not touch these parts duringoperation.m CAUTION Do not operate these u

Page 4 - General Correspondence

AUTHORIZED SERVICE FACILITIESGast Manufacturing Inc. Brenner Fiedler & Assoc. Gast Manufacturing Co., Ltd505 Washington Ave 13824 Bentley Place B

Commentaires sur ces manuels

Pas de commentaire

Gast ROA Series Laboratory Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pompes Gast ROA Series Laboratory. Gast ROA Series Laboratory User Manual [en] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pompes Gast ROA Series Laboratory